メインコンテンツへスキップ

Excelのリストに基づいて、あるフォルダから別のフォルダにファイルをコピーまたは移動するにはどうすればよいですか? 

ワークシートの列にファイル名のリストがあり、ファイルがコンピューターのフォルダーにある場合。 ただし、次のスクリーンショットに示すように、ワークシートにリストされている名前のファイルを元のフォルダーから別のフォルダーに移動またはコピーする必要があります。 このタスクをExcelでできるだけ早く完了するにはどうすればよいでしょうか。

VBAコードを使用したExcelのリストに基づいて、あるフォルダーから別のフォルダーにファイルをコピーまたは移動します


VBAコードを使用したExcelのリストに基づいて、あるフォルダーから別のフォルダーにファイルをコピーまたは移動します

ファイル名のリストに基づいてファイルをあるフォルダーから別のフォルダーに移動するには、次のVBAコードを使用するとよい場合があります。次のようにしてください。

1。 を押し続けます Altキー+ F11 Excelでキーを押すと、 アプリケーション向け Microsoft Visual Basic 窓。

2に設定します。 OK をクリックします。 インセット > モジュール、モジュールウィンドウに次のVBAコードを貼り付けます。

VBAコード:Excelのリストに基づいて、あるフォルダーから別のフォルダーにファイルを移動します

Sub movefiles()
'Updateby Extendoffice
    Dim xRg As Range, xCell As Range
    Dim xSFileDlg As FileDialog, xDFileDlg As FileDialog
    Dim xSPathStr As Variant, xDPathStr As Variant
    Dim xVal As String
    On Error Resume Next
    Set xRg = Application.InputBox("Please select the file names:", "KuTools For Excel", ActiveWindow.RangeSelection.Address, , , , , 8)
    If xRg Is Nothing Then Exit Sub
    Set xSFileDlg = Application.FileDialog(msoFileDialogFolderPicker)
    xSFileDlg.Title = " Please select the original folder:"
    If xSFileDlg.Show <> -1 Then Exit Sub
    xSPathStr = xSFileDlg.SelectedItems.Item(1) & "\"
    Set xDFileDlg = Application.FileDialog(msoFileDialogFolderPicker)
    xDFileDlg.Title = " Please select the destination folder:"
    If xDFileDlg.Show <> -1 Then Exit Sub
    xDPathStr = xDFileDlg.SelectedItems.Item(1) & "\"
    For Each xCell In xRg
        xVal = xCell.Value
        If TypeName(xVal) = "String" And xVal <> "" Then
            FileCopy xSPathStr & xVal, xDPathStr & xVal
            Kill xSPathStr & xVal
        End If
    Next
End Sub

3。 そして、 F5 このコードを実行するためのキーを押すと、ファイル名を含むセルを選択するように促すプロンプトボックスが表示されます。スクリーンショットを参照してください。

4。 次に、をクリックします OK ボタンをクリックし、ポップアウトされたウィンドウで、移動元のファイルが含まれているフォルダを選択してください。スクリーンショットを参照してください。

5。 そして、 OK、別のポップアウトウィンドウでファイルを検索する宛先フォルダの選択に進みます。スクリーンショットを参照してください。

6。 最後に、 OK ウィンドウを閉じるには、ワークシートリストのファイル名に基づいて指定した別のフォルダにファイルが移動されました。スクリーンショットを参照してください。

Note:ファイルを別のフォルダにコピーしたいが、元のファイルは保持したい場合は、以下のVBAコードを適用してください。

VBAコード:Excelのリストに基づいて、あるフォルダーから別のフォルダーにファイルをコピーします

Sub copyfiles()
'Updateby Extendoffice
    Dim xRg As Range, xCell As Range
    Dim xSFileDlg As FileDialog, xDFileDlg As FileDialog
    Dim xSPathStr As Variant, xDPathStr As Variant
    Dim xVal As String
    On Error Resume Next
    Set xRg = Application.InputBox("Please select the file names:", "KuTools For Excel", ActiveWindow.RangeSelection.Address, , , , , 8)
    If xRg Is Nothing Then Exit Sub
    Set xSFileDlg = Application.FileDialog(msoFileDialogFolderPicker)
    xSFileDlg.Title = "Please select the original folder:"
    If xSFileDlg.Show <> -1 Then Exit Sub
    xSPathStr = xSFileDlg.SelectedItems.Item(1) & "\"
    Set xDFileDlg = Application.FileDialog(msoFileDialogFolderPicker)
    xDFileDlg.Title = "Please select the destination folder:"
    If xDFileDlg.Show <> -1 Then Exit Sub
    xDPathStr = xDFileDlg.SelectedItems.Item(1) & "\"
    For Each xCell In xRg
        xVal = xCell.Value
        If TypeName(xVal) = "String" And xVal <> "" Then
            FileCopy xSPathStr & xVal, xDPathStr & xVal
        End If
    Next
End Sub

 

最高のオフィス生産性向上ツール

人気の機能: 重複を検索、強調表示、または識別する   |  空白行を削除する   |  データを失わずに列またはセルを結合する   |   数式なしのラウンド ...
スーパールックアップ: 複数の基準の VLookup    複数の値の VLookup  |   複数のシートにわたる VLookup   |   ファジールックアップ ....
詳細ドロップダウン リスト: ドロップダウンリストを素早く作成する   |  依存関係のドロップダウン リスト   |  複数選択のドロップダウンリスト ....
列マネージャー: 特定の数の列を追加する  |  列の移動  |  Toggle 非表示列の表示ステータス  |  範囲と列の比較 ...
注目の機能: グリッドフォーカス   |  デザインビュー   |   ビッグフォーミュラバー    ワークブックとシートマネージャー   |  リソースライブラリ (自動テキスト)   |  日付ピッカー   |  ワークシートを組み合わせる   |  セルの暗号化/復号化    リストごとにメールを送信する   |  スーパーフィルター   |   特殊フィルター (太字/斜体/取り消し線をフィルター...) ...
上位 15 のツールセット12 テキスト 工具 (テキストを追加, 文字を削除する、...)   |   50+ チャート 種類 (ガントチャート、...)   |   40+ 実用的 (誕生日に基づいて年齢を計算する、...)   |   19 挿入 工具 (QRコードを挿入, パスから画像を挿入、...)   |   12 変換 工具 (数字から言葉へ, 通貨の換算、...)   |   7 マージ&スプリット 工具 (高度な結合行, 分割セル、...)   |   ... もっと

Kutools for Excel で Excel スキルを強化し、これまでにない効率を体験してください。 Kutools for Excelは、生産性を向上させ、時間を節約するための300以上の高度な機能を提供します。  最も必要な機能を入手するにはここをクリックしてください...

kteタブ201905


Officeタブは、タブ付きのインターフェイスをOfficeにもたらし、作​​業をはるかに簡単にします

  • Word、Excel、PowerPointでタブ付きの編集と読み取りを有効にする、パブリッシャー、アクセス、Visioおよびプロジェクト。
  • 新しいウィンドウではなく、同じウィンドウの新しいタブで複数のドキュメントを開いて作成します。
  • 生産性を 50% 向上させ、毎日何百回もマウス クリックを減らすことができます!

 

Comments (73)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Hy skyyang and hy everybody!
I have found this page and the macro that copies files from folder and subfolder was really amazing!!
I would like to ask, if possible, how to change this macro to have the possibility to digit only the first 10 characters of the file name (and no extension).
For example:
my input for search would be “+AE704706P” and the folder, or subfolders, could contain “+AE704706P_03.pdf” “+AE704706P_03.dwg”.
I would need to copy all files starting with those 10 characters.
Thank you in advance for your attention, I hope I was clear enough...;-)

The macro that I am currently using for which I am asking your help is the following one:

Sub Copyfiles()
'Updateby Extendoffice
Dim xRg As Range, xCell As Range
Dim xSFileDlg As FileDialog, xDFileDlg As FileDialog
Dim xSPathStr As Variant, xDPathStr As Variant
Dim xVal As String
Dim fso As Object, folder1 As Object
Set xRg = Application.InputBox("Please select the file names:", "KuTools For Excel", ActiveWindow.RangeSelection.Address, , , , , 8)
If xRg Is Nothing Then Exit Sub
Set xSFileDlg = Application.FileDialog(msoFileDialogFolderPicker)
xSFileDlg.Title = " Please select the original folder:"
If xSFileDlg.Show <> -1 Then Exit Sub
xSPathStr = xSFileDlg.SelectedItems.Item(1) & "\"
Set xDFileDlg = Application.FileDialog(msoFileDialogFolderPicker)
xDFileDlg.Title = " Please select the destination folder:"
If xDFileDlg.Show <> -1 Then Exit Sub
xDPathStr = xDFileDlg.SelectedItems.Item(1) & "\"
Call sCopyFiles(xRg, xSPathStr, xDPathStr)
End Sub

Sub sCopyFiles(xRg As Range, xSPathStr As Variant, xDPathStr As Variant)
Dim xCell As Range
Dim xVal As String
Dim xFolder As Object
Dim fso As Object
Dim xF As Object
Dim xStr As String
Dim xFS As Object
Dim xI As Integer
On Error Resume Next
If Dir(xDPathStr, vbDirectory) = "" Then
MkDir (xDPathStr)
End If
For xI = 1 To xRg.Count
Set xCell = xRg.Item(xI)
xVal = xCell.Value
If TypeName(xVal) = "String" And Not (xVal = "") Then
On Error GoTo E1
If Dir(xSPathStr & xVal, 16) <> Empty Then
FileCopy xSPathStr & xVal, xDPathStr & xVal
End If
End If
E1:
Next xI
On Error Resume Next
Set fso = CreateObject("Scripting.FileSystemObject")
Set xFS = fso.GetFolder(xSPathStr)
For Each xF In xFS.SubFolders
xStr = xDPathStr '& "\" & xF.Name
Call sCopyFiles(xRg, xF.ShortPath & "\", xStr & "\")
If (CreateObject("scripting.FileSystemObject").GetFolder(xStr).Files.Count = 0) _
And (CreateObject("scripting.FileSystemObject").GetFolder(xStr).SubFolders.Count = 0) Then
RmDir xStr
End If
Next
End Sub
This comment was minimized by the moderator on the site
Good afternoon!
In this topic, I found a script that moves folders, subfolders along with files based on the list of folder names in Excel, but is there a script that does not move, but simply copies folders and subfolders along with files?
This comment was minimized by the moderator on the site
Hello, Serg,
To copy the files from the folder and subfolders, please apply the below code:


Sub movefiles()
'Updateby Extendoffice
Dim xRg As Range, xCell As Range
Dim xSFileDlg As FileDialog, xDFileDlg As FileDialog
Dim xSPathStr As Variant, xDPathStr As Variant
Dim xVal As String
Dim fso As Object, folder1 As Object
' On Error Resume Next
Set xRg = Application.InputBox("Please select the file names:", "KuTools For Excel", ActiveWindow.RangeSelection.Address, , , , , 8)
If xRg Is Nothing Then Exit Sub
Set xSFileDlg = Application.FileDialog(msoFileDialogFolderPicker)
xSFileDlg.Title = " Please select the original folder:"
If xSFileDlg.Show <> -1 Then Exit Sub
xSPathStr = xSFileDlg.SelectedItems.Item(1) & "\"
Set xDFileDlg = Application.FileDialog(msoFileDialogFolderPicker)
xDFileDlg.Title = " Please select the destination folder:"
If xDFileDlg.Show <> -1 Then Exit Sub
xDPathStr = xDFileDlg.SelectedItems.Item(1) & "\"
Call sMoveFiles(xRg, xSPathStr, xDPathStr)
End Sub

Sub sMoveFiles(xRg As Range, xSPathStr As Variant, xDPathStr As Variant)
Dim xCell As Range
Dim xVal As String
Dim xFolder As Object
Dim fso As Object
Dim xF As Object
Dim xStr As String
Dim xFS As Object
Dim xI As Integer
On Error Resume Next
If Dir(xDPathStr, vbDirectory) = "" Then
MkDir (xDPathStr)
End If
For xI = 1 To xRg.Count
Set xCell = xRg.Item(xI)
xVal = xCell.Value
If TypeName(xVal) = "String" And Not (xVal = "") Then
On Error GoTo E1
If Dir(xSPathStr & xVal, 16) <> Empty Then
FileCopy xSPathStr & xVal, xDPathStr & xVal
'Kill xSPathStr & xVal
End If
End If
E1:
Next xI
On Error Resume Next
Set fso = CreateObject("Scripting.FileSystemObject")
Set xFS = fso.GetFolder(xSPathStr)
For Each xF In xFS.SubFolders
xStr = xDPathStr & "\" & xF.Name ' Replace(xF.ShortPath, xSPathStr, xDPathStr)
Call sMoveFiles(xRg, xF.ShortPath & "\", xStr & "\")
If (CreateObject("scripting.FileSystemObject").GetFolder(xStr).Files.Count = 0) _
And (CreateObject("scripting.FileSystemObject").GetFolder(xStr).SubFolders.Count = 0) Then
RmDir xStr
End If
Next
End Sub



Please have a try, thank you!
This comment was minimized by the moderator on the site
Good afternoon!
In this topic, I found a script that moves folders, subfolders along with files based on the list of folder names in Excel, but is there a script that does not move files and folders, but simply copies folders and subfolders along with files?
This comment was minimized by the moderator on the site
Hello! I came here by accident looking for a file copy macro. Thank you for what I found! This macro is amazing! However, I would like to modify them a bit - is it possible to change something in the code so that the files to be transferred are always taken from the same lohalization?
This comment was minimized by the moderator on the site
Hello, Łukasz
To fix the folder locations, please apply the below code:
Sub movefiles()
'Updateby Extendoffice
    Dim xRg As Range, xCell As Range
    Dim xSPathStr As Variant, xDPathStr As Variant
    Dim xVal As String
    On Error Resume Next
    Set xRg = Application.InputBox("Please select the file names:", "KuTools For Excel", ActiveWindow.RangeSelection.Address, , , , , 8)
    If xRg Is Nothing Then Exit Sub
    xSPathStr = "C:\Users\AddinsVM001\Desktop\Folder-1\"  'Original folder
    xDPathStr = "C:\Users\AddinsVM001\Desktop\Folder-2\"  'destination folder
    For Each xCell In xRg
        xVal = xCell.Value
        If TypeName(xVal) = "String" And xVal <> "" Then
            FileCopy xSPathStr & xVal, xDPathStr & xVal
            Kill xSPathStr & xVal
        End If
    Next
End Sub


Please have a try, hope it can help you!
This comment was minimized by the moderator on the site
ad ơi mình k chuyển đc file pdf, excel hoặc các file khác vẫn chuyển đc, giúp mình vs ạ.T_T
This comment was minimized by the moderator on the site
Hello, Huong,
The code works well in my workbook. Did you add the file extension after the file name in your list?
Or you can upload your screenshot here, so that, we can check where the problem is.
Thank you!
This comment was minimized by the moderator on the site
Hello! Can anybody help me to fix this code to use it for copy .pdf files. This code works greate for .png or .jpg files, but doesn't work with pdf.

Sub Copyfiles()
'Updateby Extendoffice
Dim xRg As Range, xCell As Range
Dim xSFileDlg As FileDialog, xDFileDlg As FileDialog
Dim xSPathStr As Variant, xDPathStr As Variant
Dim xVal As String
Dim fso As Object, folder1 As Object
' On Error Resume Next
Set xRg = Application.InputBox("Please select the file names:", "KuTools For Excel", ActiveWindow.RangeSelection.Address, , , , , 8)
If xRg Is Nothing Then Exit Sub
Set xSFileDlg = Application.FileDialog(msoFileDialogFolderPicker)
xSFileDlg.Title = " Please select the original folder:"
If xSFileDlg.Show <> -1 Then Exit Sub
xSPathStr = xSFileDlg.SelectedItems.Item(1) & "\"
Set xDFileDlg = Application.FileDialog(msoFileDialogFolderPicker)
xDFileDlg.Title = " Please select the destination folder:"
If xDFileDlg.Show <> -1 Then Exit Sub
xDPathStr = xDFileDlg.SelectedItems.Item(1) & "\"
Call sCopyFiles(xRg, xSPathStr, xDPathStr)
End Sub

Sub sCopyFiles(xRg As Range, xSPathStr As Variant, xDPathStr As Variant)
Dim xCell As Range
Dim xVal As String
Dim xFolder As Object
Dim fso As Object
Dim xF As Object
Dim xStr As String
Dim xFS As Object
Dim xI As Integer
On Error Resume Next
If Dir(xDPathStr, vbDirectory) = "" Then
MkDir (xDPathStr)
End If
For xI = 1 To xRg.Count
Set xCell = xRg.Item(xI)
xVal = xCell.Value
If TypeName(xVal) = "String" And Not (xVal = "") Then
On Error GoTo E1
If Dir(xSPathStr & xVal, 16) <> Empty Then
FileCopy xSPathStr & xVal, xDPathStr & xVal
End If
End If
E1:
Next xI
On Error Resume Next
Set fso = CreateObject("Scripting.FileSystemObject")
Set xFS = fso.GetFolder(xSPathStr)
For Each xF In xFS.SubFolders
xStr = xDPathStr '& "\" & xF.Name ' Replace(xF.ShortPath, xSPathStr, xDPathStr)
Call sCopyFiles(xRg, xF.ShortPath & "\", xStr & "\")
If (CreateObject("scripting.FileSystemObject").GetFolder(xStr).Files.Count = 0) _
And (CreateObject("scripting.FileSystemObject").GetFolder(xStr).SubFolders.Count = 0) Then
RmDir xStr
End If
Next
End Sub
This comment was minimized by the moderator on the site
I like this solution but my case is, I want to move the sub-folder to destination folders not the file. Has anyone figure this out?
This comment was minimized by the moderator on the site
Hello, Senthil
To move subfolders from one one to another, please apply the below VBA code:
Sub movefolders()
'Updateby Extendoffice
Dim xRg As Range, xCell As Range
Dim xSFileDlg As FileDialog
Dim xSPathStr As Variant, xDPathStr As Variant
Dim xVal As String
Dim xFs

On Error Resume Next
Set xRg = Application.InputBox("Please select the folder names:", "KuTools For Excel", ActiveWindow.RangeSelection.Address, , , , , 8)
If xRg Is Nothing Then Exit Sub

Set xSFileDlg = Application.FileDialog(msoFileDialogFolderPicker)
xSFileDlg.Title = "Select the original folder:"
If xSFileDlg.Show <> -1 Then Exit Sub
xSPathStr = xSFileDlg.SelectedItems.Item(1) & "\"

Set xSFileDlg = Application.FileDialog(msoFileDialogFolderPicker)
xSFileDlg.Title = "Select the destination folder:"
If xSFileDlg.Show <> -1 Then Exit Sub
xDPathStr = xSFileDlg.SelectedItems.Item(1) & "\"

Set xFs = CreateObject("Scripting.FileSystemObject")

For Each xCell In xRg
xVal = xCell.Value
If TypeName(xVal) = "String" And xVal <> "" Then
xFs.MoveFolder xSPathStr & xVal, xDPathStr & xVal
End If
Next
End Sub


Please have a try, hope it can help you!
This comment was minimized by the moderator on the site
Actuallly i want move folder from one loction to another Based On A List In Excel, but i m not able do it that one.
Kindly help on this please.
This comment was minimized by the moderator on the site
Hello, Suhas,
Have you add the file extensions at the end of of the file names? Please check it.
If you still have the problem, please comment here. Or you can insert your data screenshot here.
This comment was minimized by the moderator on the site
Hi,

I want to ask is it possible if I want to change the set xRg = Application.InputBox to directly check the file name in the column A1?

Set xRg = Application.InputBox("Please select the file names:", "KuTools For Excel", ActiveWindow.RangeSelection.Address, , , , , 8)
If xRg Is Nothing Then Exit Sub
This comment was minimized by the moderator on the site
Hello, botAlu

If you don't want to pop out the first promp box,
you just need to change the script "Set xRg = Application.InputBox("Please select the file names:", "KuTools For Excel", ActiveWindow.RangeSelection.Address, , , , , 8)" to "Set xRg = Range("A1:A10")".
Note: A1:A10 is the list of cells contain the file name, you can change the cell reference to your own.

Please try, hope it can help you!
This comment was minimized by the moderator on the site
Alguém conseguiu adaptar para não precisar de extensão?


Has anyone managed to adapt so that it is not necessary to use the extension?
This comment was minimized by the moderator on the site
Hello, Raphael
Copying the files from one folder to another without considering the file extension, you should apply the following code:
Sub copyfiles2()
'Updateby Extendoffice
    Dim xRg As Range, xCell As Range
    Dim xSFileDlg As FileDialog, xDFileDlg As FileDialog
    Dim xSPathStr As Variant, xDPathStr As Variant
    Dim xVal, xStrPath As String
    On Error Resume Next
    Set xRg = Application.InputBox("Please select the file names:", "KuTools For Excel", ActiveWindow.RangeSelection.Address, , , , , 8)
    If xRg Is Nothing Then Exit Sub
    Set xSFileDlg = Application.FileDialog(msoFileDialogFolderPicker)
    xSFileDlg.Title = " Please select the original folder:"
    If xSFileDlg.Show <> -1 Then Exit Sub
    xSPathStr = xSFileDlg.SelectedItems.Item(1) & "\"
    Set xDFileDlg = Application.FileDialog(msoFileDialogFolderPicker)
    xDFileDlg.Title = " Please select the destination folder:"
    If xDFileDlg.Show <> -1 Then Exit Sub
    xDPathStr = xDFileDlg.SelectedItems.Item(1) & "\"
    For Each xCell In xRg
        xVal = xCell.Value
        If TypeName(xVal) = "String" And xVal <> "" Then
            xStrPath = xSPathStr
            xStrTmp = Dir(xStrPath & xVal & ".*", vbDirectory)
            Do While xStrTmp <> ""
                Debug.Print xStrPath & xStrTmp
                FileCopy xSPathStr & xStrTmp, xDPathStr & xStrTmp
                xStrTmp = Dir
            Loop
        End If
    Next
End Sub

Please try, hope it can help you!
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations