メインコンテンツへスキップ

Outlookルールで不足しているスクリプトの実行オプションを復元する方法は？

Outlook の特定のバージョン、特に最近の更新では、セキュリティ対策として [スクリプトの実行] オプションがデフォルトで無効になっている場合があります。 Outlook で [スクリプトの実行] オプションを有効にして、VBA スクリプトを使用したルールの作成を有効にするには、通常、特定のレジストリ設定を変更する必要があります。これを行う方法の詳細な手順については、読み続けてください。

Outlook で欠落している「スクリプトの実行」オプションを有効にする

行方不明を復元するには スクリプトを実行する Outlook ルール ウィザードのオプション、 まず Outlook が閉じていることを確認してくださいをクリックし、次の手順に進みます。

  1. 勝利+ R 一緒に鍵を開いて ラン ダイアログボックス。このダイアログ ボックスで、次のように入力します。 regeditを を選び OK
  2. 飛び出す中で ユーザーアカウント制御 ダイアログボックスをクリックしてください 有り
  3. レジストリエディタ ウィンドウで、以下のパスに移動して、 セキュリティ 設定： HKEY_CURRENT_USER \ Software \ Microsoft \ Office \ 16.0 \ Outlook \ Security
  4. 上の右クリック セキュリティ キーを押して、 新作 > DWORD（32ビット）値.
  5. 作成した DWORD に次の名前を付けます UnsafeClientMailRules を有効にする.
  6. をダブルクリックします UnsafeClientMailRules を有効にする DWORD で開く DWORD（32ビット）値の編集 ダイアログボックス。 タイプ 1 セクションに 実行日 ボックスをクリックして OK.
  7. Microsoft Outlookを再起動します。

上記の手順に従うと、Outlook でルールを作成するときに [スクリプトの実行] オプションを見つけて使用できるようになります。

関連記事

最高のオフィス生産性向上ツール

Kutools for Outlook - Outlook を強化する 100 以上の強力な機能

🤖 AIメールアシスタント: AI の魔法を備えたインスタント プロのメール - ワンクリックで天才的な返信、完璧な口調、多言語の習得。メールを簡単に変革しましょう! ...

📧 自動メール: 不在時 (POP および IMAP で利用可能)  /  メール送信のスケジュール設定  /  メール送信時のルールによる自動CC/BCC  /  自動転送 (高度なルール)   /  あいさつを自動追加   /  複数受信者の電子メールを個別のメッセージに自動的に分割する ...

📨 電子メール管理: メールを簡単に思い出す  /  件名などで詐欺メールをブロック  /  重複するメールを削除する  /  高度な検索  /  フォルダーを統合する ...

📁 アタッチメント プロ: バッチ保存  /  バッチデタッチ  /  バッチ圧縮  /  自動保存   /  自動デタッチ  /  自動圧縮 ...

🌟 インターフェースマジック: 😊もっと可愛くてクールな絵文字   /  タブ付きビューで Outlook の生産性を向上  /  Outlook を閉じる代わりに最小化する ...

???? ワンクリックの驚異: 受信した添付ファイルをすべてに返信する  /   フィッシングメール対策  /  🕘送信者のタイムゾーンを表示 ...

👩🏼‍🤝‍👩🏻 連絡先とカレンダー: 選択したメールから連絡先を一括追加  /  連絡先グループを個別のグループに分割する  /  誕生日のリマインダーを削除する ...

オーバー 100の特長 あなたの探索をお待ちしています! ここをクリックして詳細をご覧ください。

 

 

Comments (26)
No ratings yet. Be the first to rate!
Graham
Graham
This comment was minimized by the moderator on the site
You switched from 32 bit to 64 bit without explanation. See "New > DWORD (32-BIT Value)" then after "6. In the Edit QWORD (64-BIT)". Which is it ? Or is it both?
Reply
0
0
Amanda Lee
Amanda Lee     Graham
This comment was minimized by the moderator on the site
Sorry for the confusion. It should be the DWORD (32-bit) Value. And I've fixed it in the tutorial. 🙂
Reply
Report
0
0
jrlongoria@gmail.com
This comment was minimized by the moderator on the site
You change from DWORD to QWORD at the end.
It should be DWORD
Reply
Report
0
0
Amanda Lee
Amanda Lee    
This comment was minimized by the moderator on the site
Thank you for bringing this to my attention. I've made the necessary correction in the tutorial.
Reply
Report
0
0
Max
Max
This comment was minimized by the moderator on the site
Great! Thanks
Reply
0
0
Ethan H
Ethan H
This comment was minimized by the moderator on the site
This worked for me in Outlook for Office 365. Once point to clarify, the instructions flip-flop between DWORD and QWORD, which are mutually exclusive. I used DWORD and it worked.
Reply
0
0
FerretWilliams
FerretWilliams
This comment was minimized by the moderator on the site
I also didn't have a security folder. To get around the issue, I set a rule to forward all emails fitting a specific rule to IFTTT so I can use their automation instead. Won't work for everybody, and attachments get a long number added to them if saving to Dropbox.
Reply
0
0
dan
dan     FerretWilliams
This comment was minimized by the moderator on the site
what applet did you use on IFTTT, or did you make your own?
Reply
0
0
FerretWilliams
FerretWilliams     dan
This comment was minimized by the moderator on the site
I set an email trigger, and set the action to be to save to Dropbox. However, I've since switched to Microsoft Flow for saving Gmail directly to Dropbox. My specific goal was to save Gmail attachments to Dropbox, and Flow worked best for that after IFTTT dropped support for reading emails from Gmail.
Reply
0
0
Sagar
Sagar
This comment was minimized by the moderator on the site
I Don't Have a security folder after HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\Outlook
Reply
0
0
IT Engineer
IT Engineer     Sagar
This comment was minimized by the moderator on the site
It's because Microsoft has yet again changed something concerning this feature. Most likely, this registry key path has completely changed, or has been outright omitted. I have a Premier Support ticket open with MS currently to have them provide us the CORRECT registry setting for Office2016/2019 current monthly channel to bring the Run a Script in Rules Actions back. It is completely unacceptable for MS to continue to alter/omit features like this without clear & priority notification to clients. I understand the security risks behind using such a feature, but in certain scenarios, this still is used.
Reply
0
0
Azza
Azza     IT Engineer
This comment was minimized by the moderator on the site
By playing around I found the correct key:
Computer\HKEY_USERS\{whichevertheuserkeyis}\Software\Microsoft\Office\16.0\Outlook\Security

So do not use HKEY_Current_User, instead use HKEY_USERS
Reply
0
0
Jason
Jason
This comment was minimized by the moderator on the site
This doesn't seem to work for Outlook 2013. Is there a method that will work for this version? Also, your instructions reference DWORD and the images imply QWORD.
Reply
0
0
Lukie
Lukie     Jason
This comment was minimized by the moderator on the site
For 2013 I used HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Security and DWORD EnableUnsafeClientMailRules with value 1.
Each version of office has its own folder in "HKEY_CURRENT_USER\Software\Microsoft\Office\"

You also need to allow the macro to run in outlook 2013:

File -> Options -> Trust Centre -> Trust centre settings
-> Macro settings -> "Notifications for all macros"

This will ask you to allow the macro the first time the rule runs, but be careful not to allow any other unknown macros during day to day use. You could also use a digitally signed macro, and only allow digitally signed ones to run.

Then create your script, create a rule that runs it, and you should be set.
Reply
0
0
Marine
Marine     Lukie
This comment was minimized by the moderator on the site
Did not work for me.  I have Outlook 2013, but maybe now that Office 365 has overstepped this setting somehow.  I have the trust settings enabled to notify for all Macros.
Reply
0
0
Espen
Espen
This comment was minimized by the moderator on the site
DWORD or QWORD? A bit confusing to understand which to use... Had to create DWORD to make it work. Thanks
Reply
0
0
Rafal
Rafal
This comment was minimized by the moderator on the site
Do You have instructions how to enable this option also for outlook 2010?
Reply
0
0
abhi
abhi
This comment was minimized by the moderator on the site
Thank You! It worked for me and as mentioned in one of the comments below, Step 6 was DWORD dialogue box for me.
Reply
0
0
There are no comments posted here yet
Load More
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations