Note: The other languages of the website are Google-translated. Back to English
ログイン  \/ 
x
or
x
今すぐ登録  \/ 
x

or

Excelでマージされたセルからすべての関連データをフィルタリングするにはどうすればよいですか?

docフィルターマージされたセル1

データ範囲にマージされたセルの列があるとします。次に、この列をマージされたセルでフィルタリングして、次のスクリーンショットのように、マージされた各セルに関連するすべての行を表示する必要があります。 Excelでは、フィルター機能を使用すると、結合されたセルに関連付けられた最初のアイテムのみをフィルター処理できます。この記事では、Excelで結合されたセルからすべての関連データをフィルター処理する方法について説明します。

Excelで結合されたセルからすべての関連データをフィルタリングする

Kutools forExcelを使用してExcelのマージされたセルからすべての関連データをフィルタリングする


Excelで結合されたセルからすべての関連データをフィルタリングする

この仕事を解決するには、次の操作を段階的に行う必要があります。

1。 元の結合セルの書式を維持するために、結合セルのデータを他の空白の列にコピーします。

docフィルターマージされたセル2

2。 元の結合されたセル(A2:A15)を選択し、[ ホーム > 合併&センター マージされたセルをキャンセルするには、スクリーンショットを参照してください。

docフィルターマージされたセル3

3。 A2:A15の選択状態を維持し、[ホーム]タブに移動して、[ 検索と選択 > 特別に行く、で 特別に行く ダイアログボックスで ブランク 下のオプション 次の項目を選択します。: セクション、スクリーンショットを参照してください:

docフィルターマージされたセル4

4。 空白のセルがすべて選択されたら、次のように入力します = を押し Up キーボードの矢印キーを押してから、 Ctrl + Enter 選択したすべての空白セルを上記の値で埋めるためのキー。スクリーンショットを参照してください。

docフィルターマージされたセル5

5。 次に、手順1で貼り付けた結合セルの書式を適用する必要があります。結合セルE2:E15を選択し、[ ホーム > フォーマットペインタ、スクリーンショットを参照してください:

docフィルターマージされたセル6

6。 そして、をドラッグします フォーマットペインタ A2からA15まで塗りつぶして、元のマージされたフォーマットをこの範囲に適用します。

docフィルターマージされたセル7

7。 最後に、あなたは適用することができます フィルタ 必要なアイテムをフィルタリングする機能をクリックしてください 且つ > フィルタ、必要なフィルター基準を選択し、をクリックします OK マージされたセルをすべての関連データでフィルタリングするには、スクリーンショットを参照してください。

docフィルターマージされたセル8


Kutools forExcelを使用してExcelのマージされたセルからすべての関連データをフィルタリングする

上記の方法は、ここでは、あなたにとってやや難しいかもしれません。 Kutools for Excel's マージセルのフィルター この機能を使用すると、特定のマージされたセルのすべての相対セルをすばやくフィルタリングできます。 クリックしてKutoolsfor Excelをダウンロードしてください! 次のデモをご覧ください。

インストールした後 Kutools for Excel、次のようにしてください。

1。 特定の結合されたセルをフィルタリングする列を選択し、[ クツールズプラス > 特殊フィルター > 特殊フィルター、スクリーンショットを参照してください:

docフィルターマージされたセル8

2。 の中に 特殊フィルター ダイアログボックスで フォーマット オプションを選択してから セルを結合します ドロップダウンリストから、フィルタリングするテキスト値を入力するか、をクリックします  docフィルターマージされたセル2ボタンをクリックして、必要なセル値を選択します。スクリーンショットを参照してください。

docフィルターマージされたセル8

3。 次に、をクリックします Ok ボタンをクリックすると、条件に一致したセルの数を通知するプロンプトボックスが表示されます。スクリーンショットを参照してください。

docフィルターマージされたセル8

4。 そして、 OK ボタンをクリックすると、特定のマージされたセルのすべての相対セルが、次のスクリーンショットのように除外されます。

docフィルターマージされたセル8

クリックしてKutoolsfor Excelと無料トライアルを今すぐダウンロードしてください!


デモ:Excelの結合されたセルからすべての関連データをフィルタリングする

Kutools for Excel:300以上の便利なExcelアドインがあり、30日以内に制限なしで無料で試すことができます。 今すぐダウンロードして無料トライアル!

最高のオフィス生産性ツール

Kutools for Excelはほとんどの問題を解決し、生産性を80%向上させます

  • 再利用: すばやく挿入 複雑な数式、チャート および以前に使用したものすべて。 セルを暗号化する パスワード付き。 メーリングリストを作成する そしてメールを送る...
  • スーパーフォーミュラバー (複数行のテキストと数式を簡単に編集できます); 読書レイアウト (多数のセルを簡単に読み取って編集する); フィルター範囲に貼り付け...
  • セル/行/列をマージする データを失うことなく; 分割セルコンテンツ; 重複する行/列を組み合わせる...重複セルを防止します。 範囲を比較する...
  • [複製]または[一意]を選択します 行; 空白行を選択 (すべてのセルは空です); スーパーファインドとファジーファインド 多くのワークブックで; ランダム選択...
  • 正確なコピー 数式参照を変更せずに複数のセル。 参照の自動作成 複数のシートに; 箇条書きを挿入、チェックボックスなど...
  • テキストを抽出、テキストの追加、位置による削除、 スペースを削除する; ページング小計の作成と印刷。 セルの内容とコメントを変換する...
  • スーパーフィルター (フィルタースキームを保存して他のシートに適用します); 高度な並べ替え 月/週/日、頻度など。 特殊フィルター 太字、斜体...
  • ワークブックとワークシートを組み合わせる; キー列に基づいてテーブルをマージします。 データを複数のシートに分割; xls、xlsx、PDFをバッチ変換...
  • 300以上の強力な機能。 Office / Excel2007-2019および365をサポートします。すべての言語をサポートします。 企業や組織に簡単に導入できます。 全機能30日間の無料トライアル。 60日間の返金保証。
kteタブ201905

Officeタブは、タブ付きのインターフェイスをOfficeにもたらし、作​​業をはるかに簡単にします

  • Word、Excel、PowerPointでタブ付きの編集と読み取りを有効にする、パブリッシャー、アクセス、Visioおよびプロジェクト。
  • 新しいウィンドウではなく、同じウィンドウの新しいタブで複数のドキュメントを開いて作成します。
  • 生産性が50%向上し、毎日何百ものマウスクリックが減ります。
officetab下部
Say something here...
symbols left.
You are guest
or post as a guest, but your post won't be published automatically.
Loading comment... The comment will be refreshed after 00:00.
  • To post as a guest, your comment is unpublished.
    Miguel · 5 months ago
    Muy útil y perfectamente explicado. Gracias
  • To post as a guest, your comment is unpublished.
    Joyce · 7 months ago
    Top! Funciona perfeitamente! Muito útil! Obrigada!
  • To post as a guest, your comment is unpublished.
    Aakash · 1 years ago
    This was really helpful thanks
  • To post as a guest, your comment is unpublished.
    Woeri · 1 years ago
    I'm not one who comments a lot, but this worked like a charm and was clearly explained. Thanks!!
  • To post as a guest, your comment is unpublished.
    Swapnil · 1 years ago
    Thanku so much....this came like a big rescue for me.....
  • To post as a guest, your comment is unpublished.
    Jean · 1 years ago
    Muchas gracias, excelente aporte
  • To post as a guest, your comment is unpublished.
    Heisenbeerg · 2 years ago
    Nice solution
  • To post as a guest, your comment is unpublished.
    Kans · 2 years ago
    In the above example, if I filter as ORDER < 300 (column B), the border after each PRODUCT (column A) is lost.. How can it be achieved..?
  • To post as a guest, your comment is unpublished.
    Vish · 2 years ago
    Thanks a ton! This was exactly the issue that i had and was able to solve because of your explanation.
  • To post as a guest, your comment is unpublished.
    Tobi · 3 years ago
    What if your data has empty merged cells? Something like:

    |Column A | Column B|
    | Data 1 | bla |
    | | blubb |
    ------------------------------
    | Data 3 | bla bla |
    | | blubb blubb |
    ------------------------------
    | Data 5 | |
    | | |
    ------------------------------
    | Data 7 | bla blubb |


    How can you solve this?
  • To post as a guest, your comment is unpublished.
    krunal · 3 years ago
    thank you so much
  • To post as a guest, your comment is unpublished.
    Bingo · 3 years ago
    you're a hero
  • To post as a guest, your comment is unpublished.
    riyaz · 3 years ago
    Thank you so Much
  • To post as a guest, your comment is unpublished.
    geemoney · 3 years ago
    Thank you for tutorial. I am using this for a dashboard template, however when you add a new row you loose the ability to filter correctly? Is there a workaround for this? Something simple that someone with little excel knowledge can do?


    thanks
  • To post as a guest, your comment is unpublished.
    Kishore · 3 years ago
    Great.......
  • To post as a guest, your comment is unpublished.
    sri · 4 years ago
    Great Help. Thank u so much... :)
  • To post as a guest, your comment is unpublished.
    Marco Talin · 4 years ago
    For those wondering why this works, it's because the merge button in excel executes the "Merge" command, which inherently involves deleting data in other cells. Using Format Painter just applies the merged format.

    To put it in simple terms, think of it as the merge button on the Excel Ribbon doing two things:
    1) Merge cells
    2) Delete excess data

    By using the Format Painter, you're just doing step one of that process without doing step two. You achieve the same results if you "Paste Special-Formats Only". Also, since the "sub cells" refer back to the first cell for their value, they will all get changed when you change the value of the cell, since changing the value of a merged group of cells only changes the top-left cell in the group.

    I still have yet to find a quick way of doing this without VBA shenanigans. I really wish Microsoft included a merge option that didn't erase the other values. They give you the warning up front that they'll delete your data. You think it wouldn't be too much trouble to add an option to change that (at least, as of v2013).
  • To post as a guest, your comment is unpublished.
    Nicola · 4 years ago
    HELP!!

    I have made a spread sheet, row A contains merged cells then the next 3 rows contain the week day, the date and 2 columns with other data so there are 14 columns below the merged cells in the first row. I am trying to add a filter to the top row so that all information that will be entered into the 7 columns below will be included in the drop down filter menu as just now it just includes the information in the first column.

    I would appreciate any help with this!!

    Thank you!!
  • To post as a guest, your comment is unpublished.
    ying · 4 years ago
    this help me a lot!thanks
  • To post as a guest, your comment is unpublished.
    HOOOOOOMAN · 4 years ago
    That 's great
    You solved all my problem.
  • To post as a guest, your comment is unpublished.
    Bill Gates · 4 years ago
    This is an elegant solution. Many thanks.
  • To post as a guest, your comment is unpublished.
    Virginie · 4 years ago
    Hi,

    Is it possible to paste this conditional format to new entries?
    I've applied your method in my file, but each time I create other raws with merged cells, the format does not get pasted...
  • To post as a guest, your comment is unpublished.
    Matvey · 4 years ago
    2 simple words:

    THANK YOU!
  • To post as a guest, your comment is unpublished.
    Bharghav · 5 years ago
    Nice Tip.

    Thanks a Ton....!
  • To post as a guest, your comment is unpublished.
    jafir khan Niazi · 5 years ago
    I've have merged rows in my data at the top and at the bottom . I want to sort my data from largest to smallest without unmerging my top and bottom rows because these merged rows have no data instead they are just headings and at the bottom they are total rows
  • To post as a guest, your comment is unpublished.
    Anita Rajan · 5 years ago
    This was very helpful. The detailed diagrammatic exampled assisted a lot. Good job
  • To post as a guest, your comment is unpublished.
    Paul · 5 years ago
    Very good and useful explanation. Thank you for the effort.
  • To post as a guest, your comment is unpublished.
    Srinu · 5 years ago
    very helpful to me thanks for saving my time, it really very helpful to learn easily once again thanks.
  • To post as a guest, your comment is unpublished.
    michael · 5 years ago
    It works, but for some reason in big files, when I use the filter, the whole file freezes up. does anyone know why?
  • To post as a guest, your comment is unpublished.
    Raghu · 5 years ago
    Awesome explanation.
    Work perfectly. Thank you so much
  • To post as a guest, your comment is unpublished.
    raveendran · 5 years ago
    first its good example.
    But if we add new value again we have to do same work
    • To post as a guest, your comment is unpublished.
      Jorge Sabori · 5 years ago
      [quote name="raveendran"]first its good example.
      But if we add new value again we have to do same work[/quote]
      Do you have any better solution?
  • To post as a guest, your comment is unpublished.
    Jorge Sabori · 5 years ago
    Awesome! Thanks a bunch! Even when i had to read other posts simultaneously since i'm on Mac, still this was the key to everything. If i had a million dollars i'd share half with you :P !
  • To post as a guest, your comment is unpublished.
    ANYAHAN23 · 5 years ago
    Amazinggg .. been looking for this tutorial! :)

    KUDOS!
  • To post as a guest, your comment is unpublished.
    Tengku · 6 years ago
    Work perfectly. Thank you so much
  • To post as a guest, your comment is unpublished.
    Saravanan Elumalai · 6 years ago
    How to filter all related data from merged cells in Excel? Firstly Thanks!!! this worked perfectly. the steps are very clear and resolved my problem. But do we have any macros for this because the sheet i'm working is continuously updated by my team so i need to do this procedure every day or whenever who pulls this report, So i need macro for this. can anyone help. Thank you very much.
  • To post as a guest, your comment is unpublished.
    Abdul · 6 years ago
    Wah...Excellent Solution Thanks :)
  • To post as a guest, your comment is unpublished.
    IT · 6 years ago
    thanks for this tutorial:)
  • To post as a guest, your comment is unpublished.
    Paul H · 6 years ago
    First of all, many thanks for this. This is the perfect solution to an irritating problem, and the only real answer to this question I have seen anywhere.

    I am curious, though, about if there is any other way to achieve the same final result without using the format painter. It seems very odd to me (almost like an unintended error on Microsoft's part) that the format painter would lead to a different final result than can be achieved through ribbon buttons/menus/etc. I always thought the format painter was a convenient shortcut, but I had never previously seen it lead a to a result that can't be achieved any other way.

    I experimented with this quite a bit, and I noticed that when the above procedure is used, the individual cells retain their values after the merge is applied via the format painter. Actually, this is true even if the cell values were different (which can be dangerous because it could lead one to believe they are referencing the visible value in the merged cell, when in fact the underlying value can be different).

    Without the format painter, merging cells causes all but the top left cell values to be replaced with 0.

    I'm glad this little anomaly exists because it will greatly improve the functionality of my spreadsheet, but I would still appreciate it if anyone has more explanation.
  • To post as a guest, your comment is unpublished.
    Andy · 6 years ago
    Doesn't work, when I filter again it only displays one row.
    At least when dealing with multiple columns, with different merge-levels.. And yes I made sure that when unmerging the text still remains in all cells. Frustrating.. had hopes with my precious excel but seems I'll have to rethink the whole thing.
  • To post as a guest, your comment is unpublished.
    ElDiablo · 6 years ago
    First of all, thanks for this awesome solution. It certainly does the trick. But I'm wondering if anyone can explain why the format painter causes the merged cells to keep their underlying value while the regular merge function does not. There seems to be no way to achieve this result without using the format painter, which is odd (I always thought the format painter was only for convenience - anything it does can also be achieved via other means).

    I tried a little experiment as follows:
    -Cells A1 through A4 merged using the "Merge & Center" button. Entered "ABC" as the value.
    -Cells B1 and B2 had "ABC" as the value, but B3 and B4 had "DEF" as the value. Then I applied the format painter from A1:A4 to B1:B4.
    - Entered formulas elsewhere in the sheet that referenced each of the individual cells. Here are the results:
    =A1 displays "ABC"
    =A2 displays 0
    =A3 displays 0
    =A4 displays 0
    =B1 displays "ABC"
    =B2 displays "ABC"
    =B3 displays "DEF"
    =B4 displays "DEF"

    So even though B1:B4 appear merged and only display the value in B1 ("ABC"), Excel is keeping the original individual values for each cell in memory (even if they don't match!). And the only way to achieve seems to be with the format painter. Very odd.

    I would be very grateful if anyone has more thoughts on this.
  • To post as a guest, your comment is unpublished.
    Me · 6 years ago
    Excellent, Thanks Man
  • To post as a guest, your comment is unpublished.
    jaz · 6 years ago
    Excellennt...thank you so much
  • To post as a guest, your comment is unpublished.
    cristina · 6 years ago
    This is genius. Thank you so much for sharing.
  • To post as a guest, your comment is unpublished.
    Kavi · 6 years ago
    Thanks for the help... Great info... :-)
  • To post as a guest, your comment is unpublished.
    Bryan R · 6 years ago
    That's an excellent solution thank you!

    Is there anyway to ensure the information from the merged cell is copied when filtered? I seem to just get a blank cell copied

    any help would be greatly appreciated
  • To post as a guest, your comment is unpublished.
    Jackie · 6 years ago
    This was a HUGE help to me on a big project. This is a great skill I will utilize in the future. Thank you for explaining it so well.
  • To post as a guest, your comment is unpublished.
    Vijay · 6 years ago
    good soultion. thanks....
  • To post as a guest, your comment is unpublished.
    Stevec · 6 years ago
    Brilliant! Such a good clear explanation - saved hours of work-arounds - thank you!
  • To post as a guest, your comment is unpublished.
    Anant · 6 years ago
    Thanks for your help, It really works
  • To post as a guest, your comment is unpublished.
    Rob Smith · 6 years ago
    Brilliant solution. Thanks!